BMW 2002 WIDE (low mount) air dam
BMW 2002 WIDE (low mount) air dam
The new WIDE low mount version is similar to our standard air dam, (mounts at lower flange) only wider! Just as the original, they are hand made right here in California from .065 3003 Aluminum.
Wide version will require more installer skill and discretion, as every car is a little different (especially after a few minor bumps and bruises and a repaint or two)
“Slim” version is same wide width, just a lower profile air dam (by 3/4”) for more ground clearance.
(see our FAQ page for installation video! http://www.kooglewerks.com/installation-videos )
ships with stainless steel metric nut and bolt hardware.
this version is designed to be LOW mounted only.
all air dam/ chin spoilers are bare metal, ready to paint. no mounting holes are drilled.
Finish: all of our metal air dams are about hand made, not stamped, and therefore about 90% "ready to paint" (depending on the level of finish required) most customers are satisfied with a simple "scuff, prime and paint" (or "leave raw and keep it oiled" even) but to achieve a "show quality" paint finish, expect to do some light filler work or at least a high build polyester primer and block sand.