BMW 2002 (high mount) WIDE air dam
BMW 2002 (high mount) WIDE air dam
Due to many requests, I am happy to announce the ALL NEW aluminum Full Width versions! just as the original, hand made right here in California from .065 3003 Aluminum. a functional and classy alternative to bulky fiberglass designs. ("short" version is 1" less than "long" version)
wide version will require more installer skill and discretion, as every car is a little different (especially after a few minor bumps and bruises and a repaint or two) HIGH MOUNT version is a larger overall air dam & wraps around the fenders, meeting up with the wheel house lip.
(see our FAQ page for installation video! http://www.kooglewerks.com/installation-videos )
ships with stainless steel metric hardware, in custom wooden crate.
this version is designed to be installed ABOVE the bead detail on valence. please note when ordering if you plan to install a front bumper in conjunction with this unit. (requiring a notch cut in the mounting flange that will effect the fit and ease of installation greatly.)
all air dam/ chin spoilers are bare metal, ready to paint. no mounting holes are drilled.
Finish: all of our aluminum air dams are about hand made, not stamped, and therefore about 90% "ready to paint" (depending on the level of finish required) most customers are satisfied with a simple "scuff, prime and paint" (or "leave raw and keep it oiled" even) but to achieve a "show quality" paint finish, expect to do some light filler work or at least a high build polyester primer and block sand.